Multi gable Roofing system
2 posters
Page 1 of 1
Multi gable Roofing system
What should be d internal support condition for a MG-1 roof system, when it is a seated connection. The frame rests on rcc column.
Nithin- Posts : 4
Join date : 2014-03-06
Re: Multi gable Roofing system
use roller condition & depending up on the displacement arrange slots in plate...
if you use pinned support in the middle then the rafter size will come down but huge amount of shear will generate which has to be bare by the RCC columns, which is not suggestable ....
have a nice day....
if you use pinned support in the middle then the rafter size will come down but huge amount of shear will generate which has to be bare by the RCC columns, which is not suggestable ....
have a nice day....
Re: Multi gable Roofing system
Its not d shear but am getting moment at d internal col support....when i am using a pinned condition, unabl to attach d image. So going with roller condition.
Nithin- Posts : 4
Join date : 2014-03-06
Re: Multi gable Roofing system
the moment ur getting due to connection between two rafters... release moment @ the ends of rafters , then watch the BM...
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|